White Portland
Low iron, ground finer, sets white
- Colour
- Bright white
- Strength
- Same classes as grey, 42.5 to 52.5
- Setting
- A little faster
- Best use
- Plaster, grout, terrazzo, precast
- Cost per 50 kg
- About 2 to 3 times grey
Not sure which grade you need? Tell us the job on WhatsApp and we suggest the right bag before you order.
White cement is Portland cement made from raw materials very low in iron and manganese, mainly pure limestone and kaolin clay, burned hotter and ground finer than grey cement. It reaches the same strength classes, 42.5 to 52.5, and sets a little faster. RAK white cement comes in 50 kg bags as CEM I 52.5N or CEM II.
It is Portland cement made from raw materials that are very low in iron and manganese, mainly pure white limestone and kaolin clay. Ordinary grey cement gets its colour from iron oxide. Take the iron out, burn the clinker hotter and grind it finer, and you get a bright white powder that sets into a white, clean surface.
It hardens in the same way as grey cement and can reach the same strength class, so it is not a filler or a craft powder. Because it is ground finer, it sets a little faster and takes in moisture from the air faster, which matters in Abu Dhabi heat and humidity.
Not by nature. Strength comes from the class printed on the bag, not the colour. A 52.5N white bag is stronger than a 42.5N grey bag, and the other way round. The real difference is price: a white bag costs about two to three times a grey OPC bag, so builders use it only where the colour shows.
Use grey OPC for everything hidden inside the structure, such as concrete, blockwork and base plaster, and white cement only where the colour shows: white plaster, tile grout, terrazzo and precast. Both come in 42.5 and 52.5 strength classes, but a 50 kg white bag costs about two to three times as much as a grey bag.
Low iron, ground finer, sets white
Ordinary Portland cement, coloured by iron oxide
Simple rule: grey OPC for everything hidden inside the structure, and the white grade only where people will see the colour. A base coat of grey plaster with black sand and a thin white top coat saves money on most villa walls.
Choose CEM I 52.5N, pure white Portland cement made to EN 197-1 and ASTM C150 Type I as the maker states, for terrazzo, precast panels, GRC and white concrete. Choose CEM II (42.5 class), which contains fine limestone and usually costs a little less, for white plaster, render, skim coats, grout and pointing. If your spec names a grade, follow it.
RAK white is sold in two common grades. Both are white. They differ in strength and in what goes into the bag, so the job decides which one makes sense. We arrange the grade you need.
Pure white Portland cement with the highest strength class, made to ASTM C150 Type I and EN 197-1 as the maker states. Choose it for terrazzo, precast panels, GRC, white concrete, mouldings and any white work that must carry load or take polishing.
White Portland cement with a share of fine limestone. A little lower in strength and usually a little cheaper. A good fit for white plaster and render, skim coats, tile grout, pointing and decorative work.
Tell us what you are building, or send the consultant's spec, and we match the bag to it. If your spec names a grade, we follow the spec.
UAE price lists in October and November 2026 show RAK CEM I 52.5N at about AED 35 to 40 and RAK CEM II at about AED 28 to 36 per 50 kg bag, with other white brands at about AED 35 to 48. Grey OPC costs about AED 12 to 16 a bag. These are market ranges, not our quote.
These are typical price ranges seen on UAE public price lists and shops in October and November 2026. Shop prices often include VAT and a delivery charge on top. They are a guide, not our quote.
| Product | Bag | Typical range |
|---|---|---|
| RAK CEM I 52.5N | 50 kg | AED 35 to 40 |
| RAK CEM II | 50 kg | AED 28 to 36 |
| Other white brands | 50 kg | AED 35 to 48 |
| Small retail packs | 5 kg | AED 13 to 30 |
| Small retail packs | 1 kg | AED 15 to 25 |
| Grey OPC, for comparison | 50 kg | AED 12 to 16 |
Your delivered price depends on the grade, the bag count and your site. Tap Get a Free Quote Now and we reply on WhatsApp with the full amount before any truck moves.
Grade: CEM I costs more than CEM II. Quantity: a pallet works out cheaper per bag than a few loose bags. Distance from Mafraq to your site, urgent same day slots, and whether the bags ride with a sand load also change the rate.
Most UAE lists show about AED 28 to 48 for a 50 kg bag, with RAK grades at about AED 28 to 40. Small 1 kg and 5 kg packs cost many times more per kilo, so a 50 kg bag is far cheaper for any real site job.

On Abu Dhabi sites, white cement goes into finishes, not the structural frame: white plaster and render on villa and majlis walls, terrazzo and mosaic floors, tile grout and joints, precast, GRC and mouldings, and pointing on stone and block walls. For hidden concrete, grey cement does the same job for much less money.
On Abu Dhabi sites the white bag goes into finishes, not into the frame. These are the jobs we deliver it for most often.
The final white coat on villa walls, majlis interiors, boundary walls and courtyards, mixed with clean white sand. It gives a bright base for light paint or can be left as a natural white render.
Mixed with marble chips and pigment, then ground and polished. The white base lets the colours of the chips show clearly.
White joints for bathroom, kitchen and pool tiles, and bedding for marble and light stone where grey cement would stain through.
Cornices, columns, window surrounds, screens and garden pieces, often with a pigment added for a soft colour.
Neat white pointing on stone and block walls built with hollow blocks, plus repairs, crack filling and garden features.
Common site mixes by volume are 1 white cement to 3 or 4 parts clean white sand for a 12 mm plaster coat, 1 : 1 to 1 : 2 with fine white sand for a 3 to 5 mm skim coat, 1 : 2 to 1 : 2.5 with marble chips for terrazzo, and neat cement for tile joints under 3 mm. Grey or red sand turns white finishes dull.
Common site mixes by volume. The sand for any white finish must be clean white sand, because grey or red sand turns the finish dull. Our guide to sand types in the UAE explains the difference between white and black sand.
| Job | Cement : sand | Sand or filler | Rough quantity |
|---|---|---|---|
| White plaster, 12 mm coat | 1 : 3 to 1 : 4 | Clean white sand | About 1 bag per 10 to 12 m² |
| White skim coat, 3 to 5 mm | 1 : 1 to 1 : 2 | Fine white sand | About 1 bag per 25 to 30 m² |
| Terrazzo topping | 1 : 2 to 1 : 2.5 | Marble chips | About 1 bag per 2 to 3 m² at 15 mm |
| Tile grout, joints under 3 mm | Neat cement | None | 1 bag goes a long way |
| Tile grout, wider joints | 1 : 1 | Fine white sand | Depends on joint size |
| Pointing | 1 : 3 | Fine white sand | Depends on joint size |
Quantities are rough and change with the wall, the joint and the waste. Your consultant's spec always comes first.
Store cement bags on pallets off the ground, covered and in the shade, away from rain, sprinklers, sea air and grey cement. Use the oldest bags first and finish them within about 3 months. In Abu Dhabi humidity, white cement picks up moisture faster than grey, so do not use lumps that will not crumble in your hand.
Fine white powder picks up moisture from humid air faster than grey. A few simple steps keep every bag usable:
Buying close to the day you need it is the easiest way to keep it fresh. We deliver in small lots as the job moves, with no minimum order.
Get a Free Quote NowWe deliver white cement in any quantity, from one 50 kg bag for a tile job to full pallets for a villa. Small lots of 1 to 50 bags can ride with your sand load, and pallet loads are confirmed on order with forklift or hand unloading. As a guide, 200 m² of 12 mm white plaster needs about 17 to 20 bags.
1 to 50 bags
A few bags for grout or repairs · Can ride with your sand load
50 and up bags
Whole pallets for plaster and terrazzo · Pallet count confirmed on order
Any quantity: one bag for a tile job or pallets for a full villa. There is no minimum order.
Mixed loads: the bags can travel with your white sand, black sand or hollow blocks on the same trip.
Unloading: tell us if your site has a forklift for pallets or will unload by hand, and where the bags should go. We confirm the unloading method when you order.
Example: 200 m² of white plaster at 12 mm needs roughly 17 to 20 bags plus the white sand. That fits easily on one small load.
We deliver white cement from Mafraq Industrial Area to every part of Abu Dhabi emirate. Mussafah, ICAD and MBZ City are usually 30 to 60 minutes away, Khalifa City and Al Shamkha 45 to 75 minutes, Abu Dhabi Island, Al Reem, Saadiyat and Yas on planned slots, and Al Ain and Al Dhafra on planned trips the same or next day.
Our yard is in Mafraq Industrial Area, close to the E11, E30 and MBZ City, among the city's main building material yards. We deliver to every part of the emirate, from a few bags for a bathroom to pallets for tower finishes. Typical drive times from the yard, outside truck ban hours:
Times are typical and depend on traffic and the slot you book. Gated communities and towers: tell us about gate passes and unloading points so the driver is cleared in advance.
Local guides: villa finishes in Al Shamkha and Al Ain, and fit out sites around Mussafah.
Heavy trucks cannot run on Abu Dhabi's main roads Monday to Thursday from 6:30 to 9:00 am and 3:00 to 7:00 pm, and on Friday from 6:30 to 9:00 am and 11:00 am to 1:00 pm. Loads for the island cross Mussafah Bridge, because heavy vehicles are no longer allowed over Al Maqta Bridge. We book your slot outside these hours, and from 15 June to 15 September we avoid unloading during the 12:30 to 3:00 pm midday work break.
Truck ban We deliver
To order white cement, send your site pin, tell us the job (plaster, grout, terrazzo or precast) so we match CEM I or CEM II, give the bag count, and we reply with the full delivered price. The bags arrive on their own or with your white sand on the same trip. There is no minimum order.
and a photo of the gate or access.
Plaster, grout, terrazzo or precast, so we match CEM I or CEM II.
Number of bags, or the area in m².
Full amount, delivery included, before loading.
Unloaded where you point, with a delivery ticket.
Want to check the bags first? Ask for a photo of the stock and the bag print on WhatsApp before we load.
Buyers order white cement from us because we match CEM I or CEM II to the job or the consultant's spec, deliver cement, white sand and black sand on one trip, supply any quantity from one bag to full pallets, and send the delivered price and a photo of the bags before the truck moves.
Our yard sits in Mafraq Industrial Area with the city's main building material traders, so loads reach Mussafah, the island and the new villa districts quickly. Tell us your programme and we plan the deliveries around it.
Finishing a villa? We also deliver white sand for white plaster, black sand for base coats and mortar, concrete blocks and aggregate.

Clean white sand for plastering, blockwork and fine finishing work. Our most ordered sand for villa and building sites.
Get a quote
Pure black sand for concrete, blockwork mortar and external plaster, with a stronger bond outdoors.
Get a quote
3/8 inch (10 mm) crushed aggregate for concrete production, block factories and general construction.
Get a quote
Solid and hollow concrete blocks for walls, boundary walls and extensions, delivered on pallets.
Get a quoteThese short guides answer what buyers ask us most before an order: which material fits the job, how much to order and which truck suits the site. Each one is written by the team that loads the trucks in Mafraq every day.
The full materials list for a villa block boundary wall in Abu Dhabi, with quantities per 10 m of wall, a full…
Read the guideBlack, white, red, dune sand, gatch or 3/16? The main types of sand for construction in Abu Dhabi, what each one is…
Read the guideWhy desert sand cannot be used for concrete, what happens if it is, and which sand UAE builders use instead.
Read the guideMainly for finishes where the colour shows: white plaster and render, terrazzo, tile grout and joints, pointing, precast pieces, GRC and decorative work. For hidden structural concrete, grey cement does the same job for less.
UAE price lists show about AED 28 to 48 for a 50 kg bag, with RAK grades at about AED 28 to 40. Small 1 kg to 5 kg packs cost AED 13 to 30. Send your grade and bag count on WhatsApp for a delivered price.
Recent UAE lists show RAK CEM I at about AED 35 to 40 and RAK CEM II at about AED 28 to 36 per 50 kg bag. Your delivered price depends on the quantity and your site.
No, not by colour. Strength depends on the class on the bag, such as 42.5 or 52.5. A white and a grey bag of the same class reach about the same strength.
CEM I 52.5N for terrazzo, precast, GRC and white concrete. CEM II for plaster, skim coats, grout and pointing. If your spec names a grade, follow the spec.
Usually 1 part cement to 3 or 4 parts clean white sand for a 12 mm coat, and about 1 : 1 to 1 : 2 with fine white sand for a thin skim coat.
Yes. Use it neat with water for joints under about 3 mm, or mix 1 : 1 with fine white sand for wider joints. Wipe the tiles clean before it sets.
Use it within about 3 months, kept dry, off the ground and in the shade. Humid air makes it go lumpy faster than grey cement.
Yes. There is no minimum order. We deliver one bag or a few bags, often on the same trip as a sand load.
Yes. We deliver across Abu Dhabi emirate, including Al Ain, Madinat Zayed and Ruwais, on planned trips the same or next day.
SP Sand and Gravel delivers RAK white Portland cement in 50 kg bags, CEM I or CEM II, in any quantity to any site in Abu Dhabi. Tap Get a Free Quote Now for today's rate on WhatsApp, or call +971 52 616 7981.
As a sand and gravel supplier in Abu Dhabi, we can bring the white sand, black sand and blocks for the same job on one delivery.
Phone and WhatsApp · 8 AM to 10 PM daily+971 52 616 7981SP Sand and GravelMafraq Industrial Area, Abu Dhabi · +971 52 616 7981