Bedding sand
3/16 crushed stone, 2 to 5 mm
- Where
- Bed under the pavers
- Sold as
- Bulk, per load
- We supply
- Yes
Send the paving area in m² on WhatsApp and we work out the tons for you before you order.
Interlock sand covers two materials. The bed under the pavers is clean 3/16 crushed stone of about 2 to 5 mm, screeded 40 to 50 mm loose so it settles to 30 to 40 mm. The joints take fine dry sand, brushed into the gaps and compacted. A 100 m² area needs about 6 to 6.5 tons of bedding stone.
On UAE sites the name covers two materials that do two different jobs in the same paving area. The first is the bedding layer: a clean, single size crushed stone of about 2 to 5 mm, screeded flat so the pavers have a firm, level seat. The second is the joint filler: fine dry sand brushed into the gaps between the pavers, which locks them together when the area is compacted.
Both matter. A bed that is too fine or dusty holds water and lets the pavers sink. Joints that are left empty let the blocks rock and shift under car wheels. Order the right material for each layer and the paving stays level for years.
For the bedding layer, yes. The bedding grade is our 3/16 aggregate, a 5 mm crushed stone from our crushed aggregate range. The joint sand is a finer material, so tell us if you need both and we send them on the same booking.
From the ground up, an interlock area has 150 to 250 mm of compacted road base as the sub base, then 40 to 50 mm of loose 3/16 crushed stone as the bed, then 60 mm pavers for walkways or 80 mm for driveways, then fine dry sand swept into the joints and plate compacted. Keep falls of 1 to 2%.
A typical build up for villa yards, driveways, car parks and footpaths in Abu Dhabi, from the ground up. Your landscape or road drawing always comes first. We supply the materials only, your paving crew lays them.
| Layer (bottom to top) | Typical thickness | Material |
|---|---|---|
| Sub base | 150 to 250 mm, compacted in layers | Road base |
| Bedding course | 40 to 50 mm loose, 30 to 40 mm after compaction | 3/16 crushed stone |
| Pavers | 60 mm for walkways, 80 mm for driveways | Interlock blocks |
| Joints | Swept in, then plate compacted, swept again | Fine dry sand |
Screed the bed with rails, do not walk on it, and lay the pavers the same day. Keep falls of about 1 to 2% so rain and wash water run off.
For a 40 mm loose bed you need about 6 to 6.5 tons of 3/16 bedding stone per 100 m², plus about 0.5 tons of joint sand. A 50 m² courtyard takes about 3 to 3.5 tons, 200 m² about 12 to 13 tons and 1,000 m² about 62 tons. Formula: area × bed depth in metres × 1.55, plus 10%.
Bedding stone for a 40 mm loose bed and joint sand for standard 60 to 80 mm pavers. Add about 10% for levels and waste.
| Paving area | Bedding stone (3/16) | Joint sand |
|---|---|---|
| 50 m² | About 3 to 3.5 tons | About 0.25 tons |
| 100 m² | About 6 to 6.5 tons | About 0.5 tons |
| 200 m² | About 12 to 13 tons | About 1 ton |
| 500 m² | About 31 tons | About 2 to 2.5 tons |
| 1,000 m² | About 62 tons | About 4 to 5 tons |
Quick formula for the bed: area in m² × bed depth in m × 1.55 = tons. Joint sand depends on the paver shape and joint width, so treat that column as a guide.
How much bedding stone do I need?
Bedding sand is 3/16 crushed stone, 2 to 5 mm, laid as the bed under the pavers. Joint sand is fine dry sand swept into the gaps to lock the pavers. Polymeric sand is a bagged joint filler with a binder that sets with water, used only in joints, never as a bed. We supply bedding and joint sand, not polymeric.
3/16 crushed stone, 2 to 5 mm
Fine dry sand
Bagged joint product
Polymeric sand is a bagged joint filler with a binder that sets when wetted. It is not used for the bed. For most Abu Dhabi driveways and yards, plain fine dry sand in the joints does the job.
Do not use dune sand, plaster sand, dusty mixed sand or road base as the bed under pavers. Dune sand and plaster sand hold water and wash out, dust turns to mud, and road base is too coarse to screed level. The wrong bedding is the most common reason pavers sink or rock within a year.
Using whatever sand is cheapest on site is the most common reason pavers sink or rock within a year. Our guide on fixing sinking pavers covers the repair step by step.
Dune sand is still the right material for filling and levelling under the sub base. It just does not belong in the bedding layer.
Get a Free Quote NowBedding stone and joint sand are priced per delivered load, so the rate per ton falls as the quantity rises. UAE shops sell retail bags of crushed bedding stone at about AED 5 to 15, while imported polymeric joint sand costs about AED 180 to 1,050 per bag. These are market figures, not our quote.
Bedding stone and joint sand are priced per delivered load, so the rate per ton falls as the quantity rises. Public UAE listings give a rough idea of the market.
| Item | Unit | Typical figure |
|---|---|---|
| Crushed bedding stone, retail bag | 1 bag | About AED 5 to 15 |
| Polymeric joint sand (imported) | 20 to 50 lb bag | About AED 180 to 1,050 |
| Bedding and joint sand, bulk | Per 3 ton load or more | Ask for today's rate |
These are public figures from UAE shops, not our quote. Tap Get a Free Quote Now and we reply on WhatsApp with the full delivered amount before any truck moves.
The quantity and the mix of bedding stone and joint sand, distance from Mafraq to your site, washed or unwashed stone, and urgent same day slots.

A 6 wheel tipper carries about 18 to 20 tons of bedding stone, enough for about 300 m² of paving bed, and a trailer about 36 to 40 tons, enough for about 600 m². A 400 m² villa yard needs about 25 tons of bedding stone and 2 tons of joint sand. Smaller jobs go by pickup.
18 to 20 tons
about 12 m³ · about 300 m² of bed
36 to 40 tons
about 24 to 26 m³ · about 600 m² of bed
Any quantity: a pickup for one courtyard or a short path. There is no minimum order.
One booking: road base, bedding stone and joint sand for the same paving job, delivered in the order your crew needs them.
Tipping point: tell us where the pavers are going so the pile lands close to the work.
Example: a 400 m² villa yard needs about 25 tons of bedding stone and about 2 tons of joint sand.
We deliver interlock sand from Mafraq Industrial Area to every part of Abu Dhabi emirate. Mussafah and MBZ City are usually 30 to 60 minutes away, villas in Khalifa City, Shakhbout City and Al Shamkha 45 to 75 minutes, gated communities on Yas and Saadiyat on planned slots with the gate pass arranged, and Al Ain on planned trips.
Our yard is in Mafraq Industrial Area, close to the E11, E30 and MBZ City, among the city's main building material yards. We deliver to every part of the emirate, from a single courtyard to community roads and car parks. Typical drive times from the yard, outside truck ban hours:
Times are typical and depend on traffic and the slot you book. Gated communities: tell us about gate passes and the tipping point so the driver is cleared in advance.
Local guides: villa driveways and yards in Al Shamkha, and workshop and parking paving in Mussafah.
Heavy trucks cannot run on Abu Dhabi's main roads Monday to Thursday from 6:30 to 9:00 am and 3:00 to 7:00 pm, and on Friday from 6:30 to 9:00 am and 11:00 am to 1:00 pm. Loads for the island cross Mussafah Bridge, because heavy vehicles are no longer allowed over Al Maqta Bridge. We book your slot outside these hours, and from 15 June to 15 September we avoid unloading during the 12:30 to 3:00 pm midday work break.
Truck ban We deliver
To order interlock sand, send your site pin and the paving area in m², choose bedding stone, joint sand or both, plus road base if you need it, and we reply with the tons and the full delivered price. The truck comes outside truck ban hours and tips close to where the pavers will be laid.
and a photo of the gate or tipping area.
In m², with the paver thickness if you know it.
Bedding stone, joint sand, road base or all three.
Full amount, delivery included, before loading.
Tipped where you point, with a delivery ticket.
Want to see the material first? Ask for a photo of the stockpile on WhatsApp before we load.
Paving crews order from us because we send the right sand for each layer, crushed bedding stone and fine joint sand, never dune sand in the bed. We deliver any quantity from one courtyard to a full community road, bring road base, bedding and joint sand on one booking, and confirm the delivered price before loading.
Our yard sits in Mafraq Industrial Area with the city's main building material traders, so loads reach Khalifa City, Shakhbout City and the new villa districts quickly. Tell us your paving schedule and we time the trips around it.
Paving or building? We also deliver 3/16 stone, road base for the sub base, concrete blocks and white sand.

Clean white sand for plastering, blockwork and fine finishing work. Our most ordered sand for villa and building sites.
Get a quote
3/16 inch (about 5 mm) fine aggregate for screeding, concrete mixes and finishing work.
Get a quote
Crushed road base from Fujairah for site access roads, car parks and sub base layers under interlock.
Get a quote
Solid and hollow concrete blocks for walls, boundary walls and extensions, delivered on pallets.
Get a quoteThese short guides answer what buyers ask us most before an order: which material fits the job, how much to order and which truck suits the site. Each one is written by the team that loads the trucks in Mafraq every day.
Why interlock pavers sink in the UAE, how to tell the cause from the pattern, how to fix them and which materials…
Read the guideThe base layers to put under artificial grass in the UAE, how thick each should be, how much road base and 3/16…
Read the guideHow to work out how much sand you need for filling, concrete, plaster, block mortar, paving and gardens, with worked examples in…
Read the guideIt is the sand used with interlock pavers: a 2 to 5 mm crushed stone for the bed under the pavers, and fine dry sand brushed into the joints.
The bedding layer is. In the UAE the bedding grade is single size 3/16 crushed stone of about 2 to 5 mm.
Clean 3/16 crushed stone, screeded on a compacted road base layer. Not dune sand or plaster sand.
About 40 to 50 mm loose, which settles to about 30 to 40 mm once the pavers are compacted. Follow your drawing if it says otherwise.
About 6 to 6.5 tons of bedding stone for a 40 mm loose bed, plus about half a ton of joint sand. Add about 10% for levels and waste.
Not for the bed or the joints. It holds water and washes out, so pavers sink. Use it only for filling below the sub base.
No. Polymeric sand is a bagged joint filler with a binder that sets with water. It is only for the joints, and we do not sell it.
Bulk bedding stone and joint sand are priced per delivered load. Retail bags of crushed stone cost about AED 5 to 15 in UAE shops. Send your area and site on WhatsApp for our rate.
Call or WhatsApp SP Sand and Gravel on +971 52 616 7981. Send your site pin and the paving area, and we reply with the tons, the delivered price and the next slot.
SP Sand and Gravel delivers bedding stone and joint sand in any quantity to any site in Abu Dhabi, planned around truck ban hours. Tap Get a Free Quote Now for today's rate on WhatsApp, or call +971 52 616 7981.
As a sand and gravel supplier in Abu Dhabi, we can bring the road base and concrete blocks for the same job on one booking.
Phone and WhatsApp · 8 AM to 10 PM daily+971 52 616 7981SP Sand and GravelMafraq Industrial Area, Abu Dhabi · +971 52 616 7981